Coyote Design

Summit Lock

 

Do not be fooled by imitations.

The original SummitTM Lock was the first proximal lock designed to control rotation and the only lock with ZERO clearance required. We have improved the original and created the LowPro SummitTM Lock for easier donning. Both locks are designe specifically for long limbs. There is no need to purchase a locking liner and you can use the socket adaptor of your choice. SummitTM Locks can be used for any activity level, above or below the knee, for anyone up to 265 lbs. 


For the bottom line: The SummitTM and LowPro SummitTM offer the highest profit margin of any lock mechanism because you are converting a cushion liner into a locking liner.

 

 

Order / Parts



CD101: SummitTM Lock
Ideal for retrofitting to existing sockets.



CD102: LowPro SummitTM Lock

Easier to don than original. Must be fabricated into socket.



CD101M: SummitTM Lock with Manta Attachment

Ideal for retrofitting to existing socket.



CD102M: LowPro SummitTM Lock with Manta Attachment

Easier to don than original. Must be fabricated into socket.



CD101XT: Extra Tab Kit

Parts needed for patients with multiple liners.
Bowtie attachment is easier to roll-on than manta shape.



CD101XTM: Extra Tab Kit with Manta Attachment

Parts needed for patients with multiple liners. Comes with original shaped liner attachment. Manta shaped liner attachment may offer more stability than bowtie attachment, but is more difficult to roll-on.

Glue Form (CD101GF) is now included with every Lock and Extra Tab Kit.
Adhesive is not included with any of the above listed items.

CD4120: Quick Adhesive

20cc cartridge with 3 mix tips and plunger. Larger sizes also available (see page 14). Quick Adhesive is required for fabrication of the SummitTM Lock and LowPro SummitTM Lock.

 

 

Tech / Fitting Tips


TECH TIP:   Some liners work better than others with the SummitTM Lock and LowPro SummitTM Lock. For best results, give us a call before ordering. 

FITTING TIP:   Some patients may experience the sensation that they are not completely in the socket. This is typically due to air being trapped under the limb. Instead of trying to pull the tab to get into the socket (this will cause liner damage) an expulsion valve can help get the limb seated completely in the socket.
 
TECH TIP:   Quick Adhesive sets extremely fast. If not glued fast enough it may not properly adhere to the liner. The glue can be refrigerated to slow down its work time. Work quickly when using adhesive with the SummitTM Lock.
 
 

Instructions / Videos

For individual parts or pieces of the Summit Lock see the fabrication procedure below.

PRODUCT INSTRUCTIONSPRODUCT VIDEOS
Gluing Bowtie Liner AttachmentLowPro Summit Socket Fabrication with a Flexible Inner Socket
Gluing Manta Liner AttachmentLowPro Summit Lock Socket Fabrication

Liner Chart and Fitting Tips for Summit
and Low ProSummit Lock

Summit and LowPro Summit Lock Liner Attachment
Summit Lock Fabrication

Summit Lock Socket Fabrication

CD102 - LowPro Summit - Fabrication Sheet

 
CD101M - Summit w/Manta - Fabrication Sheet
 
CD102M - LowPro Summit w/Manta - Fabrication Sheet
 
  
To view PDF files, Acrobat Reader
must be installed on your computer.
 
 

 

 
 
Coyote Design & MFG     7450 W Lemhi, Boise, ID 83709     Phone (208) 429-0026     Toll Free (800) 819-5980     Fax (208) 429-0028     EMAIL US