 | CD106: Alignment Coupler Coupler is used for dynamic alignment during test socket fitting. Connects to standard four hole and can offset the prosthetic alignment (foot) from the bottom of the socket. Up to 265 lbs. Not for use in definitive sockets. |  | CD106E: 1/8” Spacer Plate
CD106Q: 1/4” Spacer Plate Easily make small height adjustments using these 1/8” or 1/4” aluminum spacer plates. Easily mounts between socket and pyramid. |  | CD103FF: Fast Four Connector Connector is used with Air-Lock and IntegratorTM. Connector will key directly onto the bottom of the lock or IntegratorTM and is thermoformed or laminated into socket. Used in test sockets and definitive sockets when alignment is not an issue. Pediatric versions available. |  | CD103FFLP: Low Profile Fast Four Connector A thinner version of our Fast Four Connector for tight build heights and smaller limb shapes. Ideal for use with Small Air-Lock, Grommet™ Lock or Small Integrator™. |  | CD103AF: Alignable Four Connector Connector is used with Air-Lock and IntegratorTM. Can be offset from the bottom of the lock and fabricated into the laminated socket. Used in definitive sockets when customer is needing to offset the alignment. Pediatric versions available. |
|