ACCESSORIES

Made in USA
CD103RBC Release Button Cover Added to end of release button to make it easier for patients to release the lock. Ideal for geriatric or othe
CD103FL Fitting Lock Air-Lock housing with reinforced distal end for accurate evaluation of lock pin spacing to improve seating of pin

CD103FL  |  Fitting Lock

Air-Lock housing with reinforced distal end for accurate evaluation of lock pin spacing to improve seating of pin in lock. Ideal for reducing play in lock.

Contact Coyote Design for long pin (Deep Air-Lock) fitting locks. For fitting only.

CD103RBC  |  Release Button Cover

Added to end of release button to make it easier for patients to release the lock. Ideal for geriatric or other lower dexterity or limited hand strength patients.

CD103FL Fitting Lock Instructions pdf

CD103WH Lock Wrench Removes valve body of Air-Lock to access the inside of the lock. Wrench is equivalent to 13mm deep well socket.

CD103WH |  Lock Wrench

Removes valve body of Air-Lock to access the inside of the lock. Wrench is equivalent to 13mm deep well socket.

CD103ELP Exo Lamination Plug Used when fabricating the Air-Lock in Exo sockets.
CD103GPN Guide Pin Used to make standard locks deeper. Prevents long pins from bottoming out in standard locks.
CD103PC Pin Cap The Pin Cap is used to reseal socket to keep it airtight when deepening socket when using a long pin with a standard lock.

CD103ELP  |  Exo Lamination Plug

Used when fabricating the Air-Lock in Exo sockets.

CD103GPN | Guide Pin

Used to make standard

locks deeper. Prevents

long pins from bottoming

out in standard locks.

CD103PC | Pin Cap

The Pin Cap is used to reseal

socket to keep it airtight when

deepening socket when using a

long pin with a standard lock.

CD103GPN Guide Pin Instructions pdf

Measuring

This ML Gauge and Goniometer were designed specifically for measuring prosthetic and orthotic patients. Priced right and built to last. They are the same gauge and goniometer as seen in our Q Schools on-line casting and modification classes.

CD317  |  ML Gauge

Our quality ML Gauge can measure  up to 50 cm or 20 inches. Designed for measuring prosthetic and orthotic patients.

 

CD318  |  Goniometer

Designed for measuring prosthetic and orthotic patients.

 

CD319  |  Adjustable AFO Casting Board

A simple tool for adjusting heal heights. Increase or decrease the number of plates depending on heal height when casting AFOs.

As seen in AFO class at www.opqschool.com

 

Adjustable AFO Casing Board Includes:

One 1/8” Top Plate

Two 1/4” Adjustment Plates

Two 1/8” Adjustment Plates

One 3/8” Copoly Base Board

Two 6mm x 40mm Set Screws

Two Black Plastic Knobs

 

CD316A Casting Handle Use with Air-Lock or Easy-Off Lock. The Casting Handle speeds up the casting process, helps ensure proper lock alignment
CD316SA Casting Handle Use with Small Air-Lock. The Casting Handle speeds up the casting process, helps ensure proper lock alignment

CD316A | Casting Handle

Use with Air-Lock or Easy-Off Lock.

 

CD316SA | Small Air-Lock Casting

Handle. Use with Small Air-Lock.

 

The Casting Handle speeds up the casting process,and helps ensure proper lock alignment

CD316A Casting Handle Instructions pdf

CD316SA Small Casting Handle Instructions pdf

CD103FD Fabrication Dummy Recommended for fabrication of flexible inner liners or for inner layer of PETG with Elevated Vacuum.  NOT a drop in

CD103FD  |  Fabrication Dummy

For use with CD103 Air-Lock, CD103D Deep Airlock, CD117 Easy Off Lock CD117D Deep Easy Off Lock

Recommended for fabrication of flexible inner liners or for inner layer of PETG with Elevated Vacuum.

NOT used in “drop-in” system.

CD103FD Fabrication Dummy Instructions pdf

CD103SFD Fabrication Dummy Recommended for fabrication of flexible inner liners or for inner layer of PETG with Elevated Vacuum.  NOT a drop in

CD103SFD  |  Small Fabrication Dummy

For use with CD103S Small Air-Lock, CD103D Small Deep Airlock.

Recommended for fabrication of flexible inner liners or for inner layer of PETG with Elevated Vacuum.

NOT used in “drop-in” system.

CD103FD Fabrication Dummy Instructions pdf

United Kingdom

Spain & Portugal

Netherlands

France

Australia & New Zealand

Canada

 

Kanae

Orthopedic Services

 

Italy

Japan

Germany

Norway

INTERNATIONAL

for all countries not listed